Introducing a new breed of latex paints that has a very high resistance to dirt, dust, smog and mildew. It can be painted even in a rigorous environment where there is a very high concentration of airborne pollutants.
DESCRIPTION: BOYSEN® Wallguard™ is suitable to be used near industrial areas and along highways. It is specially suited for repainting medium and high-rise building where the need to maintain a freshly painted look with less maintenance is of prime importance.
Highly Resistant to airborne pollutants and dust
Highly alkaline resistant
Resist fading, cracking and peeling
Good exterior durability
Excellent gloss retention
Good block and scrub resistance
PRINCIPAL USES: Use BOYSEN®Wallguard™ as an exterior finish for newly constructed building as well as repainting old structures.
PRACTICAL COVERAGE: 25 – 30 square meter / 4 liters /coat
SURFACE DRY: Thirty (30) minutes
DRY FILM THICKNESS: 1.5 mils /coat
OVERCOATING INTERVAL: Allow one hour before recoating.
THINNING: Use as supplied. If necessary, thin with not more than ½ liter of water per 4-liter can
APPLICATION: paint brush, roller or airless spray
PACKAGING: 4-liter cans
Allow new masonry to dry for 14 to 28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. Treat new masonry with a solution of 1 part BOYSEN® Masonry Neutralizer #44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting.
Remove all loose, scaling, flaking and peeling off paint using BOYSEN® Paint and Varnish Remover #141, wire brushing, scraping, or water blasting. Let it dry. Sand smooth painted surfaces for improved adhesion. In case of mildew infestation, treat with BOYSEN® Fungicidal Wash Solution #74 or bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, allow to stand on surface for overnight before washing off residue. Let dry.
1st coat: BOYSEN® Acrytex™ Primer #1705
Putty: BOYSEN® Acrytex™ Cast #1711
2nd & 3rd coat: BOYSEN® Wallguard™ Dirt Resisting Latex
Topcoat: Apply two coats of BOYSEN® Wallguard™ Dirt Resisting Latex on properly prepared surface.