BOYSEN® Flat Wall Enamel #800 is a flat alkyd type paint that provides great durability while being noted as a fast drying paint.
PRINCIPAL USES: For interior and exterior wood surfaces.
PRACTICAL COVERAGE: 20 – 25 square meter / 4 liters / coat
DRY FILM THICKNESS: 1.5 mils/coat
SURFACE DRY: Thirty (30) minutes
DRY THROUGH: Eight (8) hours
OVERCOATING INTERVAL: Allow six (6) hours before recoat
THINNING: Use BOYSEN® Paint Thinner #0340
APPLICATION: By brush or roller
PACKAGING: 16-liter, 4-liter and 1-liter can
COLORANTS: Use only BOYSEN® Oil Tinting Colors for tinting to achieve pastel shades. To produce dark shades, use factory mixed color. Do not use Prussian Blue B-2304, Hansa Yellow B-2319, and Bulletin Red B-2315 for exterior application.
SURFACE PREPARATION:
Surface to be painted should be clean and dry, free from dust, dirt and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth, then dust off before painting.
If repainting, first remove all blistering, peeling and scaling paint by wire brushing or BOYSEN® Paint and Varnish Remover #141. Clean surfaces thoroughly before painting.
PAINTING SCHEDULE:
1st Coat: BOYSEN® Flatwall Enamel #800
Putty: BOYSEN® Plasolux Glazing Putty #311
2nd & 3rd Coat: BOYSEN® Flatwall Enamel #800
Reviews
There are no reviews yet.