Boysen Flat Wall Enamel White #800 (16 Liters)

boysenBOYSEN^® Flat Wall Enamel #800 is a flat alkyd type paint that provides great durability while being noted as a fast drying paint.

PRINCIPAL USES: For interior and exterior wood surfaces.

PRACTICAL COVERAGE: 20 – 25 square meter / 4 liters / coat

DRY FILM THICKNESS: 1.5 mils/coat

SURFACE DRY: Thirty (30) minutes

DRY THROUGH: Eight (8) hours

OVERCOATING INTERVAL: Allow six (6) hours before recoat

THINNING: Use BOYSEN^® Paint Thinner #0340

APPLICATION: By brush or roller

PACKAGING: 16-liter, 4-liter and 1-liter can

COLORANTS: Use only BOYSEN^® Oil Tinting Colors for tinting to achieve pastel shades. To produce dark shades, use factory mixed color. Do not use Prussian Blue B-2304, Hansa Yellow   B-2319, and Bulletin Red B-2315 for exterior application.

SURFACE PREPARATION:             

Surface to be painted should be clean and dry, free from dust, dirt and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth, then dust off before painting.

If repainting, first remove all blistering, peeling and scaling paint by wire brushing or BOYSEN^® Paint and Varnish Remover #141. Clean surfaces thoroughly before painting.

PAINTING SCHEDULE:

1st Coat: BOYSEN^® Flatwall Enamel #800
Putty: BOYSEN^® Plasolux Glazing Putty #311
2nd & 3rd Coat: BOYSEN^® Flatwall Enamel #800