Boysen Wallguard Dirt Resist Semi-Gloss (4 Liters)

Introducing a new breed of latex paints that has a very high resistance to dirt, dust, smog and mildew. It can be painted even in a rigorous environment where there is a very high concentration of airborne pollutants.

DESCRIPTION:  BOYSEN^® Wallguard™ Dirt Resisting Latex is suitable to be used near industrial areas and along highways. It is specially suited for repainting medium and high-rise building where the need to maintain a freshly painted look with less maintenance is of prime importance.

Highly Resistant to airborne pollutants and dust
100% Acrylic
Highly alkaline resistant
Resist fading, cracking and peeling
Good exterior durability
Excellent gloss retention
Mildew resistant
Good block and scrub resistance

PRINCIPAL USES: Use BOYSEN^®Wallguard™ as an exterior finish for newly constructed building as well as repainting old structures.

PRACTICAL COVERAGE: 15 – 18 square meter / 4 liters /coat

SURFACE DRY: Thirty (30) minutes

DRY FILM THICKNESS: 1.5 mils /coat

OVERCOATING INTERVAL: Allow one hour before recoating.

THINNING: Use as supplied. If necessary, thin with not more than ½ liter of water per 4-liter can

APPLICATION: paint brush, roller or airless spray

PACKAGING: 4-liter cans

AVAILABILITY: Semi-Gloss #5715

COLORANTS: Use only BOYSEN^® Latex Colors for tinting to achieve pastel shades. To produce dark shades, use factory mixed colors.

SURFACE PREPARATION:

Remove all loose, scaling, flaking and peeling off paint using BOYSEN^® Paint and Varnish Remover #141, wire brushing, scraping, or water blasting. Let it dry. Sand smooth painted surfaces for improved adhesion. In case of mildew infestation, treat with a fungicidal wash solution or laundry bleach solution (diluted 1:3 with water, respectively) by swabbing or brushing.  To ensure proper treatment, allow to stand on surface for overnight before washing off residue. Let dry. Apply at least one (1) coat of Boysen Chalk Blocker #7304 over chalky old paint film. Let dry overnight.

PAINTING SCHEDULE:

1st coat: BOYSEN^® Permacoat™ Latex #701 (over bare substrate only)
Putty: BOYSEN^® Acrytex™ Cast #1711
Texture: BOYSEN^® Acrytex™ Cast #1711 (by mortar gun spray)
2nd & 3rd coat: BOYSEN^® Wallguard™ Dirt Resisting Latex